Evaluation of load balancing on the hammer shredder at PT Sukses Mantap Sejahtera

Hendry Sakke Tira, Anak Agung Alit Triadi, Nidia Zakirah Amalia

Abstract


Heavy duty hammer shredder is a tool used to crush sugarcane cells in sugar factory. In addition, this machine also aims to help milling work so that the work is not too heavy. This machine's hammer tip and seat can withstand up to 100,000 milling times. If it exceeds 100,000 times of grinding, it is necessary to carry out the maintenance process immediately to prevent unwanted damage. The maintenance process carried out is load balancing. This treatment is carried out so that the weight of the hammer shredder remains the same, namely 21.3 kg. Balancing process is done by means of electric welding. The electrode used to carry out the balancing process is the Sugar-827 electrode which is a special electrode for surface repair. After all balancing processes are completed, the heavy duty hammer shredder can be reassembled on the machine.


Keywords


heavy duty hammer shredder; sugarcane; load balancing; electrode

Full Text:

PDF

References


H.E. Sucahyo, “Perencanaan Perawatan Mesin Heavy Duty Hammer Shredder dengan Metode Reliability Centered Maintenance II (Studi Kasus: PG Kebon Agung Malang),” Thesis undergraduate, Universitas Muhammadiyah Malang, 2017.

R.P. Lukadono, Praktikno, R. Soenoko, “Analisis Penerapan Metode RCM Dan MVSM Untuk Meningkatkan Keandalan Pada Sistem Maintenance (Studi Kasus PG. X)” Jurnal Rekayasa mesin, vol. 4, No.1, pp. 43-52, 2013.

G. Maulani, D. Septiani, P.N.F Sahara, “Rancang bangun sistem informasi inventory fasilitas maintenance pada PT. Pln (persero) tangerang,” ICIT (Innovative Creative and Information Technology) Journal, Vol. 4, No. 2, pp 156-167, 2018.

N. Hairiyah, R. R. Rizki, R. A. Wijaya, “Analisis Total Productive Maintenance (TPM) Pada Stasiun Kernel Crushing Plant (KCP) Di Pt. X,” Jurnal Reknologi Pertanian Andalas, Vol. 23, No. 1, pp. 103-110.

V.D. Pramesti, A.E. Susetyo, “Analisis Penerapan Metode Reliability Centered Maintenance (RCM) Untuk Meningkatkan Keandalan Pada Sistem Maintenance,” Industrial Engineering Journal of The University of Sarjanawiyata Tamansiswa, Vol. 2, No. 1, pp. 44-53.

D. Suryadi, R. Meilinda, A.F. Suryono, Munadi, “Sistem Pakar untuk Mengidentifikasi Kerusakan Mesin Industri Menggunakan Metode Certainty Factor,” Rotasi, Vol. 20, No. 1, pp. 56-62.

F. Mustaqim, W. Kosasih, Ahmad, “Pemeliharaan mesin hydraulic shear menggunakan pendekatan reliability centered maintenance dan manajemen suku cadang, Jurnal Rekayasa Sistem Industri, Vol. 9, No. 3, pp. 153-161.

A.S. Ritonga, E.S. Purwaningsih, “Penerapan Metode Support Vector Machine (SVM) Dalam Klasifikasi Kualitas Pengelasan Smaw (Shield Metal Arc Welding),” Jurnal Ilmiah Edutic, Vol. 5, No. 1, pp. 17-25.

D. Prayitno, H.D. Hutagalung, D.P.B. Aji, “Pengaruh Kuat Arus Listrik Pengelasan Terhadap Kekerasan Lapisan Lasan pada Baja ASTM A316,” Jurnal Dinamika Vokasional Teknik Mesin, Vol. 3, No. 1, April 2018, pp. 1-6.




DOI: http://dx.doi.org/10.52155/ijpsat.v36.1.4850

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Hendry Sakke Tira, Anak Agung Alit Triadi, Nidia Zakirah Amalia

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.