Caractérisation De La Pratique Et Besoins De L’orpaillage Artisanal A Dabolava : Vers La Conception D’un Séparateur Gravimétrique Adapté

Erimahatratra Naivo Rody RANDRIARIMANANA, RAMAROSON Jean de Dieu

Abstract


This study characterizes artisanal gold mining practices in Dabolava (Madagascar) to define the requirements for adapted mechanization. Despite an attractive gold price (350,000 Ar/g in 2024, ≈70€),), the activity, practiced by individuals aged 10 to 60, remains inefficient. Statistical analysis reveals a major disconnect between labor and output (R2 = 0.23), with a marginal yield of only 0.021 g/h. Particle size analysis using the Gates-Gaudin-Schumann (GGS) model proves that the resource consists primarily of fine gold. The application of Stokes' Law establishes a critical terminal settling velocity of 0.10 m/s, confirming that manual panning turbulences prevent the sedimentation of these micro-particles. These findings demonstrate the urgent need for a transition toward mechanical gravity separation. This study sets the technical specifications for a prototype capable of maintaining a controlled laminar flow, which is essential for optimizing fine gold recovery and sustainably improving the income of local micro-production units.

 « Caractérisation de la pratique et besoins de l’orpaillage artisanal à Dabolava : Vers la conception d’un séparateur gravimétrique adapté »


Keywords


Artisanal gold mining, Dabolava, Gravity separation, Stokes’ Law, GGS model, Fine gold

Full Text:

PDF

References


Hentschel, T., Hruschka, F., &Priester, M. (2002).Global Report on Artisanal and Small-ScaleMining. Mining, Minerals and SustainableDevelopment (MMSD), IIED.

Heemskerk, M. (2003). Self-employment and povertyalleviation: Women’swork in artisanal gold mines. World Development

Bockstael, E. (2017). Rapport sur l'orpaillage à Madagascar : Enjeux et perspectives.

Wills, B. A., &Finch, J. (2015). Wills' MineralProcessingTechnology: An Introduction to the Practical Aspects of Ore Treatment and MineralRecovery. Butterworth-Heinemann.

Gates, A. O. (1915). An Investigation of Crushers and Concentrators. Engineering and Mining Journal.

Schumann, R. (1940). Principles of Comminution, I. Size Distribution and Surface Calculations. MiningTechnology.

Stokes, G. G. (1851). On the Effect of the Internal Friction of Fluids on the Motion of Pendulums. Transactions of the Cambridge Philosophical Society.

Falconer, A. (2003).Gravityseparation: old technique/new methods. Physical Separation in Science and Engineering.

Couderc, J. P. (1985).Sedimentation and fluidization. In Fluidization. AcademicPress.




DOI: http://dx.doi.org/10.52155/ijpsat.v55.2.7799

Refbacks

  • There are currently no refbacks.


Copyright (c) 2026 Erimahatratra Naivo Rody RANDRIARIMANANA, RAMAROSON Jean de Dieu

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.