3D Bioprinting In Bone And Cartilage Regeneration Review

Maged Naser, Mohamed M. Naser, Lamia H. Shehata

Abstract


 Bone and articular cartilage degeneration and damage are the most common causes of musculoskeletal disability. 3D bioprinting can help regenerate these structures. Autologous/allogeneic bone and cartilage transplantation, vascularized bone transplantation, autologous chondrocyte implantation, mosaicplasty, and joint replacement are all common clinical and surgical procedures. In vitro layer-by-layer printing of biological materials, living cells, and other biologically active substances using 3D bio printing technology is anticipated to replace the aforementioned repair methods. With the ability to prepare various organs and tissue structures, 3D bio printing has largely solved the issue of insufficient organ donors. Researchers use biomedical materials and cells as discrete materials. Bioprinting cell selection and its use in bone and cartilage repair are the primary topics of discussion in this paper.


Keywords


Biomaterial, Bioprinting, Cartilage, Bone, Regeneration.

Full Text:

PDF

References


- Zhang, Juan, et al. "A 3D printable, highly stretchable, self-healing hydrogel-based sensor based on polyvinyl alcohol/sodium tetraborate/sodium alginate for human motion monitoring." International Journal of Biological Macromolecules 219 (2022): 1216-1226.

- Zhu, Tengjiao, et al. "High efficacy of tetra-PEG hydrogel sealants for suture less dural closure." Bioactive Materials 8 (2022): 12-19.

- Siegel, Mark G., et al. "Articular cartilage restoration requires cells, scaffolds, growth factors, and mechanical stimulation." Arthroscopy: The Journal of Arthroscopic & Related Surgery37.5 (2021): 1359-1360.

- Bei, Ho Pan, et al. "Bone‐a‐Petite: Engineering Exosomes towards Bone, Osteochondral, and Cartilage Repair." Small17.50 (2021): 2101741.

- Critchley, Susan, et al. "3D printing of fibre-reinforced cartilaginous templates for the regeneration of osteochondral defects." Acta Biomaterialia 113 (2020): 130-143.

- Ruiz-Cantu, Laura, et al. "Multi-material 3D bioprinting of porous constructs for cartilage regeneration." Materials Science and Engineering: C 109 (2020): 110578.

- Liu, Xiaoyun, et al. "3D bio printed neural tissue constructs for spinal cord injury repair." Biomaterials 272 (2021): 120771.

- Potyondy, Tyler, et al. "Recent advances in 3D bioprinting of musculoskeletal tissues." Bio fabrication 13.2 (2021): 022001.

- Su, Xin, Ting Wang, and Shu Guo. "Applications of 3D printed bone tissue engineering scaffolds in the stem cell field." Regenerative therapy 16 (2021): 63-72.

- Yanyu, Yang, Wang Xing, and Wu Decheng. "Chitosan-based high-mechanical double-network hydrogels: Construction, modulation and applications." Acta Chimica Sinica 79.1 (2021): 1.

- De Angelis, Elena, et al. "Cultured Horse Articular Chondrocytes in 3D-Printed Chitosan Scaffold with Hyaluronic Acid and Platelet Lysate." Frontiers in Veterinary Science 8 (2021): 671776.

- Jang, Chul Ho, YoungWon Koo, and GeunHyung Kim. "ASC/chondrocyte-laden alginate hydrogel/PCL hybrid scaffold fabricated using 3D printing for auricle regeneration." Carbohydrate polymers 248 (2020): 116776.

- Cao, Yanyan, et al. "Mesenchymal stem cells loaded on 3D-printed gradient poly (ε-caprolactone)/methacrylated alginate composite scaffolds for cartilage tissue engineering." Regenerative Biomaterials 8.3 (2021): rbab019.

- Golebiowska, Aleksandra A., and Syam P. Nukavarapu. "Bio-inspired zonal-structured matrices for bone-cartilage interface engineering." Biofabrication 14.2 (2022): 025016.

- Wang, Shao‐Jie, et al. "Biomimetic nanosilica–collagen scaffolds for in situ bone regeneration: toward a cell‐free, one‐step surgery." Advanced Materials 31.49 (2019): 1904341.

- Burdis, Ross, Farhad Chariyev-Prinz, and Daniel J. Kelly. "Bioprinting of biomimetic self-organised cartilage with a supporting joint fixation device." Biofabrication 14.1 (2021): 015008.

- Su, Chunyu, et al. "Natural Materials for 3D Printing and Their Applications." Gels 8.11 (2022): 748.

- Lee, Jia Min, et al. "Bioprinting of collagen: considerations, potentials, and applications." Macromolecular Bioscience 21.1 (2021): 2000280.

- Diogo, Gabriela S., et al. "Cell-laden biomimetically mineralized shark-skin-collagen-based 3D printed hydrogels for the engineering of hard tissues." ACS Biomaterials Science & Engineering 6.6 (2020): 3664-3672.

- Enrico, Alessandro, et al. "3D Microvascularized Tissue Models by Laser‐Based Cavitation Molding of Collagen." Advanced Materials 34.11 (2022): 2109823.

- Lin, Hsu-Hsiang, et al. "3D-printed collagen-based waveform microfibrous scaffold for periodontal ligament reconstruction." International Journal of Molecular Sciences 22.14 (2021): 7725.

- Liu, Xiaoyun, et al. "3D bioprinted neural tissue constructs for spinal cord injury repair." Biomaterials 272 (2021): 120771.

- Heinrich, Marcel Alexander, et al. "3D bioprinting: from benches to translational applications." Small 15.23 (2019): 1805510.

- Piras, Carmen C., and David K. Smith. "Multicomponent polysaccharide alginate-based bioinks." Journal of Materials Chemistry B 8.36 (2020): 8171-8188.

- Olmos-Juste, R., et al. "3D printed alginate-cellulose nanofibers-based patches for local curcumin administration." Carbohydrate Polymers 264 (2021): 118026.

- Rastin, Hadi, et al. "3D bioprinting of a cell-laden antibacterial polysaccharide hydrogel composite." Carbohydrate Polymers264 (2021): 117989.

- Zhang, Jianhua, et al. "3D Bioprinting of human tissues: Biofabrication, bioinks, and bioreactors." International Journal of Molecular Sciences 22.8 (2021): 3971.

- Chen, You, et al. "Hybridizing gellan/alginate and thixotropic magnesium phosphate-based hydrogel scaffolds for enhanced osteochondral repair." Materials Today Bio 14 (2022): 100261.

- Erkoc, Pelin, et al. "3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels." Macromolecular Bioscience 20.10 (2020): 2000106.

- Gao, Xinshuai, et al. "Preparation of Amorphous Poly (aryl ether nitrile ketone) and Its Composites with Nano Hydroxyapatite for 3D Artificial Bone Printing." ACS Applied Biomaterials 3.11 (2020): 7930-7940.

- Heo, Dong Nyoung, et al. "3D bioprinting of carbohydrazide-modified gelatin into microparticle-suspended oxidized alginate for the fabrication of complex-shaped tissue constructs." ACS applied materials & interfaces 12.18 (2020): 20295-20306.

- Ni, Tianyu, et al. "3D bioprinting of bone marrow mesenchymal stem cell-laden silk fibroin double network scaffolds for cartilage tissue repair." Bioconjugate Chemistry31.8 (2020): 1938-1947.

- Khoshnood, Negin, Ali Zamanian, and Maryam Abbasi. "The potential impact of polyethylenimine on biological behavior of 3D-printed alginate scaffolds." International Journal of Biological Macromolecules 178 (2021): 19-28.

- Kim, Eunu, et al. "Silk fibroin enhances cytocompatibilty and dimensional stability of alginate hydrogels for light-based three-dimensional bioprinting." Biomacromolecules 22.5 (2021): 1921-1931.

- Demirtaş, Tuğrul Tolga, Gülseren Irmak, and Menemşe Gümüşderelioğlu. "A bioprintable form of chitosan hydrogel for bone tissue engineering." Biofabrication 9.3 (2017): 035003.

- Yang, Yanyu, et al. "Robust, anti-freezing and conductive bonding of chitosan-based double-network hydrogels for stable-performance flexible electronic." Carbohydrate Polymers 276 (2022): 118753.

- Xu, Jiaqi, et al. "Chitosan-based high-strength supramolecular hydrogels for 3D bioprinting." International Journal of Biological Macromolecules (2022).

- Liu, Ye, et al. "Fabrication of gelatin-based printable inks with improved stiffness as well as antibacterial and UV-shielding properties." International Journal of Biological Macromolecules 186 (2021): 396-404.

- Liu, Yanzhi, et al. "3D-bioprinted BMSC-laden biomimetic multiphasic scaffolds for efficient repair of osteochondral defects in an osteoarthritic rat model." Biomaterials 279 (2021): 121216.

- Neufurth, Meik, et al. "3D bioprinting of tissue units with mesenchymal stem cells, retaining their proliferative and differentiating potential, in polyphosphate-containing bio-ink." Biofabrication 14.1 (2021): 015016.

- Jin, Jing, et al. "Two series of microporous lanthanide–organic frameworks with different secondary building units and exposed Lewis base active sites: sensing, dye adsorption, and magnetic properties." Inorganic Chemistry 58.1 (2018): 339-348.

- Yang, Yanyu, et al. "Anti-freezing, resilient and tough hydrogels for sensitive and large-range strain and pressure sensors." Chemical Engineering Journal 403 (2021): 126431.

- Yang, Zhen, et al. "3D-bioprinted difunctional scaffold for in situ cartilage regeneration based on aptamer-directed cell recruitment and growth factor-enhanced cell chondrogenesis." ACS applied materials & interfaces 13.20 (2021): 23369-23383.

- Biranje, Santosh Shivaji, et al. "Development of cellulose nanofibril/casein-based 3D composite hemostasis scaffold for potential wound-healing application." ACS applied materials & interfaces 14.3 (2022): 3792-3808.

- Akkineni, Ashwini Rahul, et al. "A versatile method for combining different biopolymers in a core/shell fashion by 3D plotting to achieve mechanically robust constructs." Biofabrication 8.4 (2016): 045001.

- Lee, Ju-Yeon, et al. "Customized biomimetic scaffolds created by indirect three-dimensional printing for tissue engineering." Biofabrication 5.4 (2013): 045003.

- Hafezi, Forough, et al. "Bioprinting and preliminary testing of highly reproducible novel bioink for potential skin regeneration." Pharmaceutics 12.6 (2020): 550.

- Hua, Wenqiang, et al. "Exceptional mechanical properties and heat resistance of photocurable bismaleimide ink for 3D printing." Materials 14.7 (2021): 1708.

- Castillo-Henríquez, Luis, et al. "Exploration of bioengineered scaffolds composed of thermo-responsive polymers for drug delivery in wound healing." International Journal of Molecular Sciences 22.3 (2021): 1408.

- Shen, Yi, et al. "DLP printing photocurable chitosan to build bio-constructs for tissue engineering." Carbohydrate polymers235 (2020): 115970.

- Poongodi, Raju, et al. "Bio-scaffolds as cell or exosome carriers for nerve injury repair." International Journal of Molecular Sciences 22.24 (2021): 13347.

- Nakielski, Paweł, et al. "Laser‐Assisted Fabrication of Injectable Nanofibrous Cell Carriers." Small 18.2 (2022): 2104971.

- Kim, Hyun Seung, and Kuen Yong Lee. "Stretchable and self-healable hyaluronate-based hydrogels for three-dimensional bioprinting." Carbohydrate Polymers 295 (2022): 119846.

- Deng, Changxu, et al. "3D bio-printed biphasic scaffolds with dual modification of silk fibroin for the integrated repair of osteochondral defects." Biomaterials Science 9.14 (2021): 4891-4903.

- Guo, Maoze, et al. "One-step 3D printed intelligent silk fibroin artificial skin with built-in electronics and microfluidics." Analyst 146.19 (2021): 5934-5941.

- Sakai, S., et al. "Silk fibroin nanofibers: A promising ink additive for extrusion three-dimensional bioprinting." Materials Today Bio 8 (2020): 100078.

- Rajput, Monika, et al. "Light-based 3D bioprinting of bone tissue scaffolds with tunable mechanical properties and architecture from photocurable silk fibroin." International Journal of Biological Macromolecules 202 (2022): 644-656.

- Trucco, Diego, et al. "Modeling and fabrication of silk fibroin–gelatin-based constructs using extrusion-based three-dimensional bioprinting." ACS Biomaterials Science & Engineering 7.7 (2021): 3306-3320.

- Jiang, Guangyao, et al. "A 3D-printed PRP-GelMA hydrogel promotes osteochondral regeneration through M2 macrophage polarization in a rabbit model." Acta biomaterialia128 (2021): 150-162.

- Zhang, Jianhua, et al. "3D Bioprinting of human tissues: Biofabrication, bioinks, and bioreactors." International Journal of Molecular Sciences 22.8 (2021): 3971.

- Desai, Nina, et al. "New hyaluronan-based biomatrix for 3-D follicle culture yields functionally competent oocytes." Reproductive Biology and Endocrinology 20.1 (2022): 1-14.

- Flégeau, Killian, Anna Puiggali-Jou, and Marcy Zenobi-Wong. "Cartilage tissue engineering by extrusion bioprinting utilizing porous hyaluronic acid microgel bioinks." Biofabrication 14.3 (2022): 034105.

- Huang, Haokun, et al. "In vitro application of drug-loaded hydrogel combined with 3D-printed porous scaffolds." Biomedical Materials 17.6 (2022): 065019.

- Janarthanan, Gopinathan, et al. "Manufacturing of self-standing multi-layered 3D-bioprinted alginate-hyaluronate constructs by controlling the cross-linking mechanisms for tissue engineering applications." Biofabrication 14.3 (2022): 035013.

- Kim, Hyun Seung, and Kuen Yong Lee. "Stretchable and self-healable hyaluronate-based hydrogels for three-dimensional bioprinting." Carbohydrate Polymers 295 (2022): 119846.

- Martyniak, Kari, et al. "Biomaterial composition and stiffness as decisive properties of 3D bioprinted constructs for type II collagen stimulation." Acta Biomaterialia 152 (2022): 221-234.

- Wang, Dongzhi, et al. "Hyaluronic acid methacrylate/pancreatic extracellular matrix as a potential 3D printing bioink for constructing islet organoids." Acta biomaterialia (2022).

- Wang, Hufei, et al. "Multifunctional microcapsules: a theranostic agent for US/MR/PAT multi-modality imaging and synergistic chemo-photothermal osteosarcoma therapy." Bioactive materials 7 (2022): 453-465.

- Potyondy, Tyler, et al. "Recent advances in 3D bioprinting of musculoskeletal tissues." Biofabrication 13.2 (2021): 022001.

- Fairag, Rayan, et al. "A composite lactide-mineral 3D-printed scaffold for bone repair and regeneration." Frontiers in Cell and Developmental Biology 9 (2021): 654518.

- Han, Xingting, et al. "Tailoring the biologic responses of 3D printed PEEK medical implants by plasma functionalization." Dental Materials 38.7 (2022): 1083-1098.

- He, Dali, et al. "3D-printed PEEK extravascular stent in the treatment of nutcracker syndrome: imaging evaluation and short-term clinical outcome." Frontiers in bioengineering and biotechnology 8 (2020): 732.

- Li, Feng, et al. "Cryogenic 3D Printing of ß-TCP/PLGA Composite Scaffolds Incorporated with BpV (Pic) for Treating Early Avascular Necrosis of Femoral Head." Frontiers in Bioengineering and Biotechnology 9 (2022): 1354.

- Li, Wenfeng, et al. "Pore Size of 3D-Printed Polycaprolactone/Polyethylene Glycol/Hydroxyapatite Scaffolds Affects Bone Regeneration by Modulating Macrophage Polarization and the Foreign Body Response." ACS Applied Materials & Interfaces 14.18 (2022): 20693-20707.

- Sikder, Prabaha, et al. "Bioactive amorphous magnesium phosphate-polyetheretherketone composite filaments for 3D printing." Dental Materials 36.7 (2020): 865-883.

- Prechtel, Alexander, et al. "Comparison of various 3D printed and milled PAEK materials: Effect of printing direction and artificial aging on Martens parameters." Dental Materials 36.2 (2020): 197-209.

- Oladapo, Bankole I., et al. "Lattice design and 3D-printing of PEEK with Ca10 (OH)(PO4) 3 and in-vitro bio-composite for bone implant." International Journal of Biological Macromolecules 165 (2020): 50-62.

- Puertas-Bartolomé, María, et al. "Development of bioactive catechol functionalized nanoparticles applicable for 3D bioprinting." Materials Science and Engineering: C 131 (2021): 112515.

- Zheng, Jibao, et al. "Additively-manufactured PEEK/HA porous scaffolds with excellent osteogenesis for bone tissue repairing." Composites Part B: Engineering 232 (2022): 109508.

- Yang, Weiwei, et al. "Fabrication of smart components by 3D printing and laser-scribing technologies." ACS applied materials & interfaces 12.3 (2019): 3928-3935.

- Sharma, Neha, et al. "Quantitative assessment of point-of-care 3D-printed patient-specific polyetheretherketone (PEEK) cranial implants." International Journal of Molecular Sciences22.16 (2021): 8521.

- Zhu, Ce, et al. "3D-Printed multifunctional polyetheretherketone bone scaffold for multimodal treatment of osteosarcoma and osteomyelitis." ACS Applied Materials & Interfaces 13.40 (2021): 47327-47340.

- Wang, Mian, et al. "Molecularly cleavable bioinks facilitate high-performance digital light processing-based bioprinting of functional volumetric soft tissues." Nature communications13.1 (2022): 3317.

- Aihemaiti, Patiguli, et al. "Optimization of 3D printing parameters of biodegradable polylactic acid/hydroxyapatite composite bone plates." International Journal of Bioprinting8.1 (2022).

- Buj-Corral, Irene, et al. "Characterization of 3D Printed Metal-PLA Composite Scaffolds for Biomedical Applications." Polymers 14.13 (2022): 2754.

- Chang, Po-Chun, et al. "Preclinical evaluation of a 3D-printed hydroxyapatite/poly (lactic-co-glycolic acid) scaffold for ridge augmentation." Journal of the Formosan Medical Association120.4 (2021): 1100-1107.

- Wang, Yihan, et al. "Approaches to Biofunctionalize Polyetheretherketone for Antibacterial: A Review." Frontiers in Bioengineering and Biotechnology 10 (2022).

- Custodio, Cyron L., et al. "Powder loading effects on the physicochemical and mechanical properties of 3D printed poly lactic acid/hydroxyapatite biocomposites." International Journal of Bioprinting 7.1 (2021).

- Golebiowska, Aleksandra A., and Syam P. Nukavarapu. "Bio-inspired zonal-structured matrices for bone-cartilage interface engineering." Biofabrication 14.2 (2022): 025016.

- Grottkau, Brian E., et al. "Rapid fabrication of anatomically-shaped bone scaffolds using indirect 3D printing and perfusion techniques." International Journal of Molecular Sciences 21.1 (2020): 315.

- He, Haijun, et al. "3D printed and electrospun, transparent, hierarchical polylactic acid mask nanoporous filter." International Journal of Bioprinting 6.4 (2020).

- Rodríguez-Merchán, Emérito Carlos. "Bone healing materials in the treatment of recalcitrant nonunions and bone defects." International Journal of Molecular Sciences 23.6 (2022): 3352.

- Waldburger, Leonie, et al. "3D-Printed Hand Splints versus Thermoplastic Splints: A Randomized Controlled Pilot Feasibility Trial." International Journal of Bioprinting 8.1 (2022).

- Chiesa-Estomba, Carlos M., et al. "Three-dimensional bioprinting scaffolding for nasal cartilage defects: a systematic review." Tissue Engineering and Regenerative Medicine 18 (2021): 343-353.

- Cui, Yuecheng, et al. "Crystallization enhanced thermal-sensitive hydrogels of PCL-PEG-PCL triblock copolymer for 3D printing." Biomedical Materials 16.3 (2021): 035006.

- Hamid, Omar A., et al. "3D bioprinting of a stem cell-laden, multi-material tubular composite: An approach for spinal cord repair." Materials Science and Engineering: C 120 (2021): 111707.

- Koch, Fritz, et al. "Mechanical properties of polycaprolactone (PCL) scaffolds for hybrid 3D-bioprinting with alginate-gelatin hydrogel." journal of the mechanical behavior of biomedical materials 130 (2022): 105219.

- Xu, Bingbing, et al. "Protein-spatiotemporal partition releasing gradient porous scaffolds and anti-inflammatory and antioxidant regulation remodel tissue engineered anisotropic meniscus." Bioactive Materials 20 (2023): 194-207.

-Bandyopadhyay, Amit, Indranath Mitra, and Susmita Bose. "3D printing for bone regeneration." Current osteoporosis

reports 18 (2020): 505-514.

-Mousavi Nejad, Zohre, et al. "3D bioprinting of polycaprolactone-based scaffolds for pulp-dentin regeneration: investigation

of physicochemical and biological behavior." Polymers 13.24 (2021): 4442.

-Waldburger, Leonie, et al. "3D-Printed Hand Splints versus Thermoplastic Splints: A Randomized Controlled Pilot Feasibility Trial." International Journal of Bioprinting 8.1 (2022).

-Nulty, Jessica, et al. "3D bioprinting of prevascularised implants for the repair of critically-sized bone defects." Acta biomaterialia 126 (2021): 154-169.

-Dann, Tyler, et al. "Anatase titanium dioxide imparts photoluminescent properties to PA2200 commercial 3D printing material to generate complex optical imaging phantoms." Materials 14.7 (2021): 1813.

-Helal, Mohamed A., et al. "In-vitro comparative evaluation for the surface properties and impact strength of CAD/CAM milled, 3D printed, and polyamide denture base resins." Journal of International Society of Preventive & Community Dentistry 12.1 (2022): 126.

-Poltorak, Lukasz, et al. "Electrochemical study of ephedrine at the polarized liquid-liquid interface supported with a 3D printed cell." Journal of Hazardous Materials 402 (2021): 123411.

-Powell, Alexander W., et al. "On-demand activation of photochromic nanoheaters for high color purity 3D printing." Nano Letters 20.5 (2020): 3485-3491.

-Tey, Wei Shian, Chao Cai, and Kun Zhou. "A comprehensive investigation on 3D printing of polyamide 11 and thermoplastic polyurethane via multi jet fusion." Polymers 13.13 (2021): 2139.

-Zhang, Yunfan, et al. "Facile fabrication of a biocompatible composite gel with sustained release of aspirin for bone regeneration." Bioactive materials 11 (2022): 130-139.

-Barati, Danial, et al. "Injectable and Crosslinkable PLGA‐Based Microribbons as 3D Macroporous Stem Cell Niche." Small 16.22 (2020): 1905820.

-Carlier, Emeric, et al. "Development of mAb-loaded 3D-printed (FDM) implantable devices based on PLGA." International journal of pharmaceutics 597 (2021): 120337.

-Jiang, Ji-Peng, et al. "Three-dimensional bioprinting collagen/silk fibroin scaffold combined with neural stem cells promotes nerve regeneration after spinal cord injury." Neural regeneration research 15.5 (2020): 959.

-Koons, Gerry L., et al. "Effect of 3D printing temperature on bioactivity of bone morphogenetic protein-2 released from polymeric constructs." Annals of Biomedical Engineering (2021): 1-12.

-Li, Pinxue, et al. "Chitosan hydrogel/3D-printed poly (ε‐caprolactone) hybrid scaffold containing synovial mesenchymal stem cells for cartilage regeneration based on tetrahedral framework nucleic acid recruitment." Biomaterials278 (2021): 121131.

-Long, Jing, et al. "Multifunctional magnesium incorporated scaffolds by 3D-Printing for comprehensive postsurgical management of osteosarcoma." Biomaterials 275 (2021): 120950.

-Abbasi-Ravasjani, Sonia, et al. "Sulfated carboxymethyl cellulose and carboxymethyl κ-carrageenan immobilization on 3D-printed poly-ε-caprolactone scaffolds differentially promote pre-osteoblast proliferation and osteogenic activity." Frontiers in Bioengineering and Biotechnology 10 (2022): 1662.

-Andjela, Lalatovic, et al. "A review on Vat Photopolymerization 3D-printing processes for dental application." Dental Materials (2022).

-Deng, Changxu, et al. "3D bio-printed biphasic scaffolds with dual modification of silk fibroin for the integrated repair of osteochondral defects." Biomaterials Science 9.14 (2021): 4891-4903.

-Gong, Haihuan, et al. "3D bio-printing of photocrosslinked anatomically tooth-shaped scaffolds for alveolar ridge preservation after tooth extraction." Journal of Materials Chemistry B 10.41 (2022): 8502-8513.

-Zamboni, Fernanda, et al. "Curcumin encapsulated polylactic acid nanoparticles embedded in alginate/gelatin bioinks for in situ immunoregulation: Characterization and biological assessment." International Journal of Biological Macromolecules 221 (2022): 1218-1227.

-Murab, Sumit, et al. "Alginate based hydrogel inks for 3D bioprinting of engineered orthopedic tissues." Carbohydrate Polymers (2022): 119964.

-Serafin, Aleksandra, et al. "Printable alginate/gelatin hydrogel reinforced with carbon nanofibers as electrically conductive scaffolds for tissue engineering." Materials Science and Engineering: C 122 (2021): 111927.

-Zhang, Zhenxue, et al. "3D printing processability of a thermally conductive compound based on carbon nanofiller-modified thermoplastic polyamide 12." Polymers 14.3 (2022): 470.

-Abdallah, Mira, et al. "Coumarins as powerful photosensitizers for the cationic polymerization of epoxy-silicones under near-UV and visible light and applications for 3D printing technology." Molecules 25.9 (2020): 2063.

-Dadras‐Toussi, Omid, et al. "Multiphoton Lithography of Organic Semiconductor Devices for 3D Printing of Flexible Electronic Circuits, Biosensors, and Bioelectronics." Advanced Materials 34.30 (2022): 2200512.

-Foster, Jeffrey C., et al. "Continuous Additive Manufacturing using Olefin Metathesis." Advanced Science 9.14 (2022): 2200770.

-Liu, Yi, et al. "An injectable, self-healing phenol-functionalized chitosan hydrogel with fast gelling property and visible light-crosslinking capability for 3D printing." Acta Biomaterialia 122 (2021): 211-219.

-Bud, Eugen S., et al. "Accuracy of three-dimensional (3D) printed dental digital models generated with three types of resin polymers by extra-oral optical scanning." Journal of Clinical Medicine 10.9 (2021): 1908.

-Fang, Zheng, et al. "Effect of reconstruction algorithm on the identification of 3D printing polymers based on hyperspectral CT technology combined with artificial neural network." Materials 13.8 (2020): 1963.

-Fleck, Elyse, et al. "Advancing 3D-Printed Microfluidics: Characterization of a Gas-Permeable, High-Resolution PDMS Resin for Stereolithography." Micromachines 12.10 (2021): 1266.

- Mahmoudi, Mohammadreza, et al. "Additive-free and support-free 3D printing of thermosetting polymers with isotropic mechanical properties." ACS Applied Materials & Interfaces13.4 (2021): 5529-5538.

- Shan, Junyang, et al. "Design and synthesis of free-radical/cationic photosensitive resin applied for 3D printer with liquid crystal display (LCD) irradiation." Polymers 12.6 (2020): 1346.

- Tessanan, Wasan, Philippe Daniel, and Pranee Phinyocheep. "Development of photosensitive natural rubber as a mechanical modifier for ultraviolet-curable resin applied in digital light processing-based three-dimensional printing technology." ACS omega 6.23 (2021): 14838-14847.

- Fitzpatrick, Vincent, et al. "Functionalized 3D-printed silk-hydroxyapatite scaffolds for enhanced bone regeneration with innervation and vascularization." Biomaterials 276 (2021): 120995.

- Fazal, Faraz, et al. "A modified 3D printer as a hybrid bioprinting-electrospinning system for use in vascular tissue engineering applications." Medical Engineering & Physics 94 (2021): 52-60.

- He, Xiao-Yu, et al. "Advances in the application of mesenchymal stem cells, exosomes, biomimetic materials, and 3D printing in osteoporosis printing in osteoporosis treatment." Cellular & Molecular Biology Letters 26.1 (2021): 1-23.

- Su, Xin, Ting Wang, and Shu Guo. "Applications of 3D printed bone tissue engineering scaffolds in the stem cell field." Regenerative therapy 16 (2021): 63-72.

- De Angelis, Elena, et al. "Cultured Horse Articular Chondrocytes in 3D-Printed Chitosan Scaffold with Hyaluronic Acid and Platelet Lysate." Frontiers in Veterinary Science 8 (2021): 671776.

- Li, Qiushi, et al. "Laser-induced corrugated graphene films for integrated multimodal sensors." ACS Applied Materials & Interfaces 13.31 (2021): 37433-37444.

- Diloksumpan, Paweena, et al. "Combining multi-scale 3D printing technologies to engineer reinforced hydrogel-ceramic interfaces." Biofabrication 12.2 (2020): 025014.

- Dudman, Joseph PR, et al. "Reliable inkjet printing of chondrocytes and MSCs using reservoir agitation." Biofabrication 12.4 (2020): 045024

-Feng, Zhaoxuan, et al. "A novel waterborne polyurethane with biodegradability and high flexibility for 3D printing." Biofabrication 12.3 (2020): 035015.

- Jang, Chul Ho, YoungWon Koo, and GeunHyung Kim. "ASC/chondrocyte-laden alginate hydrogel/PCL hybrid scaffold fabricated using 3D printing for auricle regeneration." Carbohydrate polymers 248 (2020): 116776.

- Hong, Heesun, et al. "Digital light processing 3D printed silk fibroin hydrogel for cartilage tissue engineering." Biomaterials232 (2020): 119679.

- Abdelrahman, Sherin, et al. "A Parkinson’s disease model composed of 3D bioprinted dopaminergic neurons within a biomimetic peptide scaffold." Biofabrication 14.4 (2022): 044103

- Mabrouk, Mohamed H. Elsafi, et al. "The spatial self-organization within pluripotent stem cell colonies is continued in detaching aggregates." Biomaterials 282 (2022): 121389.

- Edgar, L., et al. "Regenerative medicine, organ bioengineering and transplantation." Journal of British Surgery 107.7 (2020): 793-800.

-Haring, Alexander P., et al. "3D bioprinting using hollow multifunctional fiber impedimetric sensors." Biofabrication 12.3 (2020): 035026.

- Bliley, Jacqueline, et al. "FRESH 3D bioprinting a contractile heart tube using human stem cell-derived cardiomyocytes." Biofabrication 14.2 (2022): 024106.

- Han, Yu, et al. "High-precision, gelatin-based, hybrid, bilayer scaffolds using melt electro-writing to repair cartilage injury." Bioactive Materials 6.7 (2021): 2173-2186.

- Rastogi, Prasansha, and Balasubramanian Kandasubramanian. "Review of alginate-based hydrogel bioprinting for application in tissue engineering." Biofabrication11.4 (2019): 042001.

- Fan, Daoyang, et al. "Progressive 3D printing technology and its application in medical materials." Frontiers in pharmacology11 (2020): 122.

- Nakamura, Anna, et al. "Bio-3D printing iPSC-derived human chondrocytes for articular cartilage regeneration." Biofabrication 13.4 (2021): 044103.

- Beh, Cyrus W., et al. "A fluid-supported 3D hydrogel bioprinting method." Biomaterials 276 (2021): 121034.

- Shan, Junyang, et al. "Design and synthesis of free-radical/cationic photosensitive resin applied for 3D printer with liquid crystal display (LCD) irradiation." Polymers 12.6 (2020): 1346.

-De Santis, Martina M., et al. "Extracellular‐matrix‐reinforced bioinks for 3D bioprinting human tissue." Advanced materials33.3 (2021): 2005476.

- Monfared, Marzieh, et al. "3D bioprinting of dual-crosslinked nanocellulose hydrogels for tissue engineering applications." Journal of Materials Chemistry B 9.31 (2021): 6163-6175.

-Park, Jeong Hun, et al. "3D bioprinting of a trachea-mimetic cellular construct of a clinically relevant size." Biomaterials279 (2021): 121246.

-Shin, Yu Jung, et al. "3D bioprinting of mechanically tuned bioinks derived from cardiac decellularized extracellular matrix." Acta biomaterialia 119 (2021): 75-88.

- Soman, Soja Saghar, and Sanjairaj Vijayavenkataraman. "Perspectives on 3D bioprinting of peripheral nerve conduits." International journal of molecular sciences 21.16 (2020): 5792.

-Barreiro Carpio, Mabel, et al. "3D Bioprinting strategies, challenges, and opportunities to model the lung tissue microenvironment and its function." Frontiers in Bioengineering and Biotechnology (2021): 1097.

- Potyondy, Tyler, et al. "Recent advances in 3D bioprinting of musculoskeletal tissues." Biofabrication 13.2 (2021): 022001.

- Ghorbani, Farnaz, et al. "Tuning the biomimetic behavior of hybrid scaffolds for bone tissue engineering through surface modifications and drug immobilization." Materials Science and Engineering: c 130 (2021): 112434.

-Murphy, Caroline A., et al. "Regional dependency of bovine meniscus biomechanics on the internal structure and glycosaminoglycan content." Journal of the Mechanical Behavior of Biomedical Materials 94 (2019): 186-192.

- Davidson, Sean M., et al. "Progress in cardiac research: from rebooting cardiac regeneration to a complete cell atlas of the heart." Cardiovascular research 117.10 (2021): 2161-2174.

-Gurlin, Rachel E., Jaime A. Giraldo, and Esther Latres. "3D bioprinting and translation of beta cell replacement therapies for type 1 diabetes." Tissue Engineering Part B: Reviews 27.3 (2021): 238-252.

- Liu, Gele, et al. "Advances in pluripotent stem cells: history, mechanisms, technologies, and applications." Stem cell reviews and reports 16 (2020): 3-32.

- Jin, Zhizhong, et al. "Engineering the fate and function of human T-Cells via 3D bioprinting." Biofabrication 13.3 (2021): 035016.

-Mandrycky, Christian, et al. "3D bioprinting for engineering complex tissues." Biotechnology advances 34.4 (2016): 422-434.

-Neufurth, Meik, et al. "3D bioprinting of tissue units with mesenchymal stem cells, retaining their proliferative and differentiating potential, in polyphosphate-containing bio-ink." Biofabrication 14.1 (2021): 015016.

- Suarez-Martinez, Ariana D., et al. "Bioprinting on live tissue for investigating cancer cell dynamics." Tissue Engineering Part A27.7-8 (2021): 438-453.

- Tang, Min, et al. "Three-dimensional bioprinted glioblastoma microenvironments model cellular dependencies and immune interactions." Cell research 30.10 (2020): 833-853.

- Leberfinger, Ashley N., et al. "Concise review: bioprinting of stem cells for transplantable tissue fabrication." Stem cells translational medicine 6.10 (2017): 1940-1948.

- Ozbolat, Ibrahim T., and Monika Hospodiuk. "Current advances and future perspectives in extrusion-based bioprinting." Biomaterials 76 (2016): 321-343.

- Horváth, Lenke, et al. "Engineering an in vitro air-blood barrier by 3D bioprinting." Scientific reports 5.1 (2015): 1-8.

- Billiet, Thomas, et al. "The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability." Biomaterials 35.1 (2014): 49-62.

-Durmus, Naside Gozde, Savas Tasoglu, and Utkan Demirci. "Functional droplet networks." Nature materials 12.6 (2013): 478-479.

- Mattimore, Justin P., et al. "A general-purpose driver board for the HP26 ink-jet cartridge with applications to bioprinting." Proceedings of the IEEE SoutheastCon 2010 (SoutheastCon). IEEE, 2010.

- Athanasiou, Kyriacos A., et al. "Self-organization and the self-assembling process in tissue engineering." Annual review of biomedical engineering 15 (2013): 115-136.

- Akkouch, A., Y. Yu, and I. T. Ozbolat. "Microfabrication of scaffold-free tissue strands for three-dimensional tissue engineering. Biofabrication 7, 31002." (2015).

- Yu, Yin, et al. "Three-dimensional bioprinting using self-assembling scalable scaffold-free “tissue strands” as a new bioink." Scientific reports 6.1 (2016): 1-11.

- Makris, Eleftherios A., et al. "Repair and tissue engineering techniques for articular cartilage." Nature Reviews Rheumatology 11.1 (2015): 21-34.

-Farr, Jack, et al. "Clinical cartilage restoration: evolution and overview." Clinical Orthopaedics and Related Research® 469 (2011): 2696-2705.

- Nehrer, Stefan, Myron Spector, and Tom Minas. "Histologic analysis of tissue after failed cartilage repair procedures." Clinical Orthopaedics and Related Research (1976-2007) 365 (1999): 149-162.

- Cole, Brian J., Cecilia Pascual-Garrido, and Robert C. Grumet. "Surgical management of articular cartilage defects in the knee." JBJS 91.7 (2009): 1778-1790.

-Izadifar, Zohreh, Xiongbiao Chen, and William Kulyk. "Strategic design and fabrication of engineered scaffolds for articular cartilage repair." Journal of functional biomaterials 3.4 (2012):

- Daly, Andrew C., et al. "A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage." Biofabrication 8.4 (2016): 045002.

-Markstedt, Kajsa, et al. "3D bioprinting human chondrocytes with nanocellulose–alginate bioink for cartilage tissue engineering applications." Biomacromolecules 16.5 (2015): 1489-1496.

- El-Sherbiny, Ibrahim M., and Magdi H. Yacoub. "Hydrogel scaffolds for tissue engineering: Progress and challenges." Global Cardiology Science and Practice 2013.3 (2013): 38.

- Abbadessa, A., et al. "A thermo-responsive and photo-polymerizable chondroitin sulfate-based hydrogel for 3D printing applications." Carbohydrate polymers 149 (2016): 163-174.

- Shim, Jin-Hyung, et al. "Three-dimensional bioprinting of multilayered constructs containing human mesenchymal stromal cells for osteochondral tissue regeneration in the rabbit knee joint." Biofabrication 8.1 (2016): 014102.

- Xu, Tao, et al. "Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications." Biofabrication 5.1 (2012): 015001.

- Bose, Susmita, Sahar Vahabzadeh, and Amit Bandyopadhyay. "Bone tissue engineering using 3D printing." Materials today16.12 (2013): 496-504.

- Khanarian, Nora T., et al. "A hydrogel-mineral composite scaffold for osteochondral interface tissue engineering." Tissue Engineering Part A 18.5-6 (2012): 533-545.

- Cui, Xiaofeng, et al. "Direct human cartilage repair using three-dimensional bioprinting technology." Tissue Engineering Part A 18.11-12 (2012): 1304-1312.

- Cui, Xiaofeng, et al. "Thermal inkjet printing in tissue engineering and regenerative medicine." Recent patents on drug delivery & formulation 6.2 (2012): 149-155.

- Hoenig, Elisa, et al. "High amplitude direct compressive strain enhances mechanical properties of scaffold-free tissue-engineered cartilage." Tissue Engineering Part A 17.9-10 (2011): 1401-1411.

- Bryant, Stephanie J., and Kristi S. Anseth. "Hydrogel properties influence ECM production by chondrocytes photoencapsulated in poly (ethylene glycol) hydrogels." Journal of Biomedical Materials Research: An Official Journal of The Society for Biomaterials and The Japanese Society for Biomaterials 59.1 (2002): 63-72.

- Elisseeff, J., et al. "Photoencapsulation of chondrocytes in poly (ethylene oxide) ‐based semi‐interpenetrating networks." Journal of Biomedical Materials Research: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials 51.2 (2000): 164-171.

- Leboy, Phoebe S., et al. "Dexamethasone induction of osteoblast mRNAs in rat marrow stromal cell cultures." Journal of cellular physiology 146.3 (1991): 370-378.

- Jiang, Jie, et al. "Bioactive stratified polymer ceramic-hydrogel scaffold for integrative osteochondral repair." Annals of biomedical engineering 38 (2010): 2183-2196.

- Gao, Guifang, and Xiaofeng Cui. "Three-dimensional bioprinting in tissue engineering and regenerative medicine." Biotechnology letters 38 (2016): 203-211.

- Qi, Xin, et al. "Three-dimensional printing of calcium sulfate and mesoporous bioactive glass scaffolds for improving bone regeneration in vitro and in vivo." Scientific reports 7.1 (2017): 1-12.

- Evinger, Albert J., et al. "Osteogenic differentiation of mesenchymal stem/stromal cells within 3D bioprinted neotissues." (2013): 193-2.

- Keriquel, Virginie, et al. "In vivo bioprinting for computer-and robotic-assisted medical intervention: preliminary study in mice." Biofabrication 2.1 (2010): 014101.

- Herberg, Samuel, et al. "Inkjet-based biopatterning of SDF-1β augments BMP-2-induced repair of critical size calvarial bone defects in mice." Bone 67 (2014): 95-103.

- Duarte Campos, Daniela Filipa, et al. "Bioprinting organotypic hydrogels with improved mesenchymal stem cell remodeling and mineralization properties for bone tissue engineering." Advanced healthcare materials 5.11 (2016): 1336-1345.

- Das, Sanskrita, et al. "Bioprintable, cell-laden silk fibroin–gelatin hydrogel supporting multilineage differentiation of stem cells for fabrication of three-dimensional tissue constructs." Acta biomaterialia 11 (2015): 233-246.

- Kolesky, David B., et al. "Three-dimensional bioprinting of thick vascularized tissues." Proceedings of the national academy of sciences 113.12 (2016): 3179-3184.

- Raja, Naren, and Hui-suk Yun. "A simultaneous 3D printing process for the fabrication of bioceramic and cell-laden hydrogel core/shell scaffolds with potential application in bone tissue regeneration." Journal of Materials Chemistry B 4.27 (2016): 4707-4716.




DOI: http://dx.doi.org/10.52155/ijpsat.v37.2.5161

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Maged Naser

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.